background image

91

User Manual WMF 1200 S  

Safety and warranty

no warranty is provided:

• 

On any parts subject to natural wear and tear. This 
includes seals, mixers, and brewing unit, among 
other items.

• 

For malfunctions due to the effect of the weather, 
scale build-up, chemical, physical, electrochemical 
or electrical effects.

• 

If a water filter is not fitted even though the local 
water supply requires use of a water filter and 
malfunctions occur as a consequence.

• 

With respect to faults which occur as a result 
of failure to follow handling instructions and 
regulations, maintenance and care of the device 
(e.g. User Manual and maintenance instructions).

• 

With respect to faults which occur as the result of 
failure to use original WMF spare parts or incorrect 
assembly by the purchaser or by third parties or by 
faulty or negligent treatment.

• 

With respect to the consequences of improper 
modifications undertaken without the consent of 
WMF, or by repair or reconditioning work on the 
part of the purchaser or by third parties.

• 

With respect to faults caused by inappropriate or 
improper use.

The customer is advised in the order 
confirmation whether or not use of 
a water filter is required.

important

Maintenance  

w

 starting on page 77

Summary of Contents for 1200 S





































































































Reviews: