WMF 1200 S User Manual Download

Page: 59 / 100

User Manual WMF 1200 S

Care

7.4 Daily cleaning

Health hazard /

irritation and scalding hazard

•

If the combi spout is not installed, hot water
and cleaning fluid can be discharged in an
uncontrolled manner.

> For all cleaning programs, the combi spout,

the milk nozzle, and the milk hose must be
installed.

7.4.1 Cleaning program

The cleaning program leads step by step through
machine cleaning, the optional mixer rinsing and the
machine cleaning via software.

7.4.2 Milk system Cleaning

Scalding hazard

•

If a beverage is initiated accidentally, there
is a hazard of being injured.

> Always switch off using the ON/OFF switch

prior to cleaning.

> Disconnect mains plug.

Health hazard

•

In case of eye contact, the WMF milk system
cleaner can cause severe eye injury.

> Ensure that the milk system cleaner never

makes contact with the eyes of a person or
animal.

The milk system consists of:

•

Combi spout

•

Milk nozzle

•

Milk hose

CaUtion

Follow the Safety chapter

starting on page 6

Cleaning program

CaUtion

Follow the Safety chapter

starting on page 6

CaUtion

Follow the Safety chapter

starting on page 6

Milk system cleaning

Cleaning instructions

Summary of Contents for 1200 S





































































































Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands

WMF 1200 S, User Manual

Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands