16
User Manual WMF 1200 S
Start-up
3.3.1 insert water filter (optional)
Remove the in-built water sieve from the water
tank
[1]
Be sure to keep the drain screen.
Place the water filter adapter onto the water tank
coupling from above (with lock open) and lock into
place
[2]
Unpack the water filter and insert into the water
filter adapter
[3]
3.3.2 Determine the water hardness
Request water hardness reading from water supplier,
or determine using WMF carbonate hardness test
(complete with instructions) in the accessories
The unit used is the “Deutsche Karbonathärte” = °dKH
3.3.3 Fill the water tank
Rinse out the water tank and fill it with clean cold
drinking water
Place lid on water tank and insert the water tank
until it stops
note
If the water hardness is between
0 and 4 °dKH, no water filter is
needed.
w
Start-up program
1
2
3
