WMF 1200 S User Manual Download

Page: 34 / 100

User Manual WMF 1200 S

Settings | Cup volumes (cup size)

5.1 Cup volumes (cup size)

The coffee machine adjusts the recipe quantities to the
new cup volume.

Briefly touch

Browse with to

Select the

cup volumes

program with

Select the beverage for which the cup volume
should be adjusted to the cup size

Adjust the cup volume with and .

The cup volume is displayed in %. 100 % corresponds
to the beverage setting.

If necessary, the new setting can be tested with
a dispensing test

As soon as the cup volume is set as desired, confirm
with

Dispensing test

Press the desired beverage button

The beverage is dispensed using the newly changed
values.

Each beverage setting can be tested during
setup.

select program

browse: -/+

DI_04_01_01

cup volumes

select beverage

DI_04_01_03

Dispensing test

page 35

cup volume: 100%

OK: P test: beverage

DI_04_01_04

tip

Summary of Contents for 1200 S





































































































Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands

WMF 1200 S, User Manual

Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands