WMF 1200 S User Manual Download

Page: 55 / 100

User Manual WMF 1200 S

Care | Care safety instructions

Health hazard / hygiene

•

Germs can multiply in a coffee machine that
is not in use.

> Prior to and after every instance that the

machine is shut off for several days, perform
all cleanings.

Health hazard / hygiene

•

All cleaning agents are perfectly tuned to
the cleaning programs.

> Use only WMF cleaning and descaling media.

Health hazard /

irritation and scalding hazard

•

Hot cleaning fluid runs out of the combi
spout when cleaning.

•

The hot liquids can irritate the skin, and the
heat poses a burn hazard.

> Never reach under the spouts while

cleaning.

> Switch off the machine before cleaning the

front panel to avoid a hot beverage being
accidentally dispensed.

> Ensure that no one ever drinks the cleaning

solution.

CaUtion

Follow the Safety chapter

starting on page 6

CaUtion

Follow the Safety chapter

starting on page 6

CaUtion

Follow the Safety chapter

starting on page 6

Summary of Contents for 1200 S





































































































Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands

WMF 1200 S, User Manual

Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands