WMF 1200 S User Manual Download

Page: 14 / 100

User Manual WMF 1200 S

Start-up

3 Start-up

(For initial start-up after delivery from the factory)

Follow the User Manual

> Please refer to the User Manual, paying

special attention to the safety instructions
and Safety chapter.

> Ensure that the staff and all users have

access to the User Manual.

> Read the User Manual carefully prior to use.

Hazard to life due to electrical

shock if not followed

The voltage inside the coffee machine is
a hazard to life.

•

Never open the housing.

•

Never loosen the screws, and do not remove
any housing parts.

Conditions for usage

and installation

Follow the User Manual.

CaUtion

Important!

Follow the User Manual Signs and
Symbols

page 12

Follow the Safety chapter
starting on page

Warning

Follow the Safety chapter

starting on page 6

iMportant

Technical data

starting on page 93

Summary of Contents for 1200 S





































































































Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands

WMF 1200 S, User Manual

Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands