WMF 1200 S User Manual Download

Page: 29 / 100

User Manual WMF 1200 S

Operation

4.10 Manual insert

The manual insert is located in the centre of the coffee
machine cover.

Manual insert is used:

•

For inserting cleaning tablets

•

When using additional ground coffee types, such as
decaffeinated coffee

•

Add ground coffee or cleaning tablet only
after the display message.

•

Use only ground coffee in the manual insert.

•

Do not use water-soluble powdered coffee.

•

Do not use coffee that is ground too finely.

preparation using the manual insert

Place a cup of the appropriate size beneath the
combi spout

Open manual insert lid

The display shows:

Insert ground coffee (max. 16 g)

Close manual insert lid

Press the desired beverage button

Touch to cancel the process.

iMportant

Observe the Warranty chapter

starting on page 90

Manual insert

insert ground coffee

select beverage

DI_03_07_01

Summary of Contents for 1200 S





































































































Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands

WMF 1200 S, User Manual

Search results

Summary of Contents for 1200 S

Reviews:

Related manuals for 1200 S

Brands by name

Popular brands