Subject to changes without notice !
Änderungen vorbehalten !
Gearless Lift Machine
WSG-SF
Operating Instructions
EN
Code: GM.8.004284.EN
Date:
28. Jan 2020
Version: 0.16
Page: 10
5.3.2. Motor connection / Winding protection
•
The electrical connection of the motor and the winding sensors is made by power connector or in the terminal box.
•
The motor cable must be shielded. Ensure that the cable shield contacts the frame over a large area at both ends.
•
The motor phases U1, V1 and W1 must be connected correctly to the corresponding phases of the inverter; they must
not be interchanged.
•
We recommend using a inverter with a switching frequency of 10 to 12 kHz.
•
The PTC resistor embedded in the winding must be evaluated in the control system or frequency inverter to protect
the motor from overtemperature.
1. Plug connection
Signal
Pin
U1
1
1
A
B
C
D
2
3
4
PE
2
W1
3
V1
4
not assigned
A
not assigned
B
temperature
sensor
C
Pin contacts of flanged con nector socket
(exterior)
temperature
sensor
D
The electrical connection of the motor and
the winding temperature sensors is made
by a rotatable 8-pole power connector
provided on the motor. A type B ST A
078 FR 05 08 0035 000 connector from
“intercontec” can be used, for example, as
the female plug.
2.T
erminal bo
x
M
Screw plugs 2 x M 16 and 1 x M 25
2 x M 16 Cable gland
for cable diameter 5-10 mm
WAGO 262
cable cross-section: ... 4 mm
2
stripping length required: 9-10 mm
M 25 Cable gland
for cable diameter 13-18 mm
Triplet PTC
Type STM-150.DS...
PTC thermistors
•
The maximum operating voltage of the PTC thermis tors is not allowed to exceed 25 V DC
•
To achieve the maximum precision, the measurement voltage per PTC thermistor must not exceed 2.5 V DC.
Short-circuiting the motor terminals
•
The motor terminals of the synchronous lift machines, type WSG, can be short-circuited, if required, to brake the lift
machine faster.
•
However, this is only permissible at speeds less than or equal to the rated speed of the respective motor.
Summary of Contents for WSG-SF Series
Page 111: ......