Witt 24310037, Installation Advices - Instructions For The Use

Page: 16 / 52

16 16
GAS SECTION
2
GAS INSTALLATION REQUIREMENTS
Important !
• The walls adjacent to the cooker must be of heat-resistant material.
•
Before installation, make sure that the local distribution conditions (gas
type and pressure) and the adjustment of this appliance are compatible. The
appliance adjustment conditions are given on the plate or the label.
• This appliance must be installed and serviced only by a suitably qualified,
registered installer. The installer shall refer to the local standards in force.
•
Failure to install the appliance correctly could invalidate any manufacturer’s
warranty.
Only for Denmark, Sweden and Finland:
This appliance is supplied for use on Natural gas, LPG or Town Gas* (check the gas
regulation label attached on the appliance).
•
Appliances supplied for use on Natural gas: they are adjusted for this gas only and
cannot be used on any other gas (LPG or Town gas) without modification.
The appliances are manufactured for conversion to LPG and Town gas.
• Appliances supplied for use on LPG: they are adjusted for this gas only and cannot
be used on any other gas (Natural or Town gas) without modification.
The appliances are manufactured for conversion to Natural and Town gas.
• Appliances supplied for use on Town gas: they are adjusted for this gas only and
cannot be used on any other gas (Natural gas or LPG) without modification.
The appliances are manufactured for conversion to Natural gas and LPG.
* Does not apply to Finland
If the Natural gas/LPG/Town gas conversion kit is not supplied with the appliance this kit
can be purchased by contacting the After-Sales Service.
Only for Norway:
This appliance is supplied for use on LPG only (check the gas regulation label attached
on the appliance). It cannot be converted for use with another type of gas.
If the appliance is supplied with a gas conversion kit, this kit cannot be used for Norway.