All specifications subject to change without notice.
Phone: (800) 793-0093
www.dacor.com
PLANNING
GUIDE
ETT304-1, ETT365-2
Renaissance
®
30” and 36” Wide,
Electric Cooktops
Document # PG03-002
Revised 10/03/12 Page 1/3
PRoDUCT DImENsIoNs - ETT365-2
36 1/4" *
(92.1 cm)
34 3/8"
(87.3 cm)
19 3/8"
(49.5 cm)
21 1/4" *
(54.0 cm)
4” (10.2 cm)
chassis height
3/16” (4.8 mm)
30 1/4" *
(76.8 cm)
28 3/8"
(72.1 cm)
19 3/8"
(49.5 cm)
21 1/4" *
(54.0 cm)
4” (10.2 cm)
chassis height
3/16” (4.8 mm)
PRoDUCT DImENsIoNs - ETT304-1
Product tolerances: ±1/16” (±1.6 mm) unless otherwise noted
NOTES:
1. The cooktop is supplied with a flexible, 48 inch long
power conduit consisting of two (2) insulated hot lead
conductors (L1 and L2) and one (1) insulated ground
conductor. There is no neutral connection. All leads are
copper. The conduit is connected to the right corner of
the cooktop. Do not connect the ground wire to neutral.
2. Tested in accordance with the latest edition of ANSI
Z21.1 and U.L. 858 Standard for household cooking
appliances.
3. These cooktops are not approved for recessed
installation.
Model No.
Electrical Circuit Required
Total Connected
Load*
Minimum Supply Wire Size
Line and Ground Connections
ETT304-1
240 Vac, 60 Hz, 40 Amps.
6.9 kW (29 Amps.)
No. 8 AWG
ETT365-2
240 Vac, 60 Hz, 40 Amps.
9.1 kW (38 Amps.)
* For reference only, See the product data label on bottom of unit for exact specifications.
ELECTRICAL sUPPLy REqUIREmENTs
WARNING
•
Observe all governing codes and ordinances during planning
and installation. Contact your local building department for
further information.
•
This appliance must be installed in accordance with the
accompanying installation instructions.
* For units with stainless steel trim, other units may be up to 1/8" less.
