Wisstar WP-N6516-M2-16P User Manual Download Page 88

Page: 88 / 195

Network Video Recorder User Manual

Export Vehicle File

Click OK to export files to backup device.

Search History Operation

Save Search Condition

Purpose

You can save the search conditions for future reference and quick search.

Go to File Management > All Files/People Appearance File/Vehicle File.

Set the search conditions.

Click Save.

Enter a name in text field and click Finished. The saved search conditions will be displayed in
search history list.

Call Search History

Purpose:

You can quickly search files by calling search history.

Go to File Management > All Files/Human Files/Vehicle Files.

Click a search conditon to quickly search files.

Summary of Contents for WP-N6516-M2-16P




































































































































































































Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands

Wisstar WP-N6516-M2-16P, User Manual

Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands