Wisstar WP-N6516-M2-16P User Manual Download Page 24

Page: 24 / 195

Network Video Recorder User Manual

Draw the Pattern



Connect at least 4 dots to draw the pattern.



Each dot can be connected for once only.

Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.

If the two patterns are different, you must set the pattern again.



Only the admin user has the permission to unlock the device.

Please configure the pattern first before unlocking. Please refer to Chapter 2.2 Step 2In the IP
Camera Activation text field, enter the password to activate the IP camera (s) connected to
the device.

Optionally, check the Export GUID to export the GUID for future password resetting.

Click OK to save the password and activate the device.

Summary of Contents for WP-N6516-M2-16P




































































































































































































Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands

Wisstar WP-N6516-M2-16P, User Manual

Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands