Wisstar WP-N6516-M2-16P, User Manual

Page: 57 / 195

Network Video Recorder User Manual
56
Go to System > Live View > General.
Set the video output interface, live view mode and dwell time.

Video Output Interface: Select the video output interface.

Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.

Dwell Time: The time in seconds to dwell between switching of cameras when enabling auto-
switch. The range is from 5s to 300s.
Go to View Settings to set the view layout.
Click OK to save the settings.
Configure Channel-zero Encoding
Purpose:
You can enable the channel-zero encoding when you need to get a remote view of many channels
in real time from web browser or CMS (Client Management System) software, in order to decrease
the bandwidth requirement without affecting the image quality.
Go to System>Live View>General.
Select the video output interface to Channel-Zero.
Go to System>Live View>Channel-Zero.
Check the checkbox to enable the channel-zero.
Live View- Channel-Zero Encoding
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate. The higher frame rate and
bitrate settings result in the higher requirement of bandwidth.
Click Apply.
Result:
You can view all of the channels in one screen using the CMS or web browser.