Wisstar WP-N6516-M2-16P User Manual Download Page 36

Page: 36 / 195

Network Video Recorder User Manual

Enable the H.265 Stream Access

The device can automatically switch to the H.265 stream of IP camera (which supports H.265 video
format) for the initial access.

Go to More Settings > H.265 Auto Switch Configuration at the top taskbar.

Check the checkbox of Enable H.265 (For Initial Access).

Click OK.

Upgrade the IP Camera

The IP camera can be remotely upgraded through the device.

Plug the U-flash drive with the IP camera’s firmware upgrade file to the device.

On the camera management interface, select a camera.

Go to More Settings > Upgrade at the top taskbar.

Select the firmware upgrade file from the U-flash drive.

Click Upgrade.

Result:

The IP camera will reboot automatically after the upgrading completes.

Configure the Customized Protocols

Purpose

To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.

Go to More Settings > Protocol at the top taskbar to enter the protocol management
interface.

Summary of Contents for WP-N6516-M2-16P




































































































































































































Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands

Wisstar WP-N6516-M2-16P, User Manual

Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands