Wisstar WP-N6516-M2-16P User Manual Download Page 125

Page: 125 / 195

Network Video Recorder User Manual

124

Select a camera to configure.

Click Parking.

Parking Detection

Check Enable Parking Detection.

Optionally, check Save VCA Picture to save the captured parking detection pictures.

Set parking detection parameters.

Select Arming Area. Up to 4 areas are selectable.

Set Time Threshold (s).

Time Threshold: The time of car staying in the region. If the value is 10, an alarm is
triggered after the car has stayed in the region for 10s. Its range is [5s-20s].

Set Sensitivity.

Sensitivity: Similarity of the background image to the object. The higher the value, the
easier the detection alarm will be triggered.

Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.

Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.

Click Apply.

Unattended Baggage Detection

Purpose:

Summary of Contents for WP-N6516-M2-16P




































































































































































































Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands

Wisstar WP-N6516-M2-16P, User Manual

Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands