Wisenet PNM-9031RV, User Manual

Page: 19 / 32

English _
19
!
INST
ALLA
TION & CONNECTION
Installation precautions when using the IR mode
~ <Auto1>: Optimized to evenly radiate IR light when generally mounting the camera on the wall.
~ <Auto2>: Optimized to evenly radiate IR light when generally mounting the camera on the ceiling.
~
<Manual>: You can manually adjust each zone to better capture the environment where the camera is
installed.
~ The IR LED will moved following the rotation of the camera lens.
~ Make sure that the front factory default direction is correct when installing it.
~
Even after the complete installation of the camera, you can customize it using the video rotation if
necessary.
[Example of installing the ceiling mount]
<Factory default direction>
ZONE #2 ZONE #2
ZONE #4 ZONE #4
ZONE #1 ZONE #1 ZONE #3 ZONE #3
Front direction
ZONE #2 ZONE #2
ZONE #1 ZONE #1
ZONE #3 ZONE #3
ZONE #4 ZONE #4
Front
direction
CONNECTING WITH OTHER DEVICE
WiFi dongle
Power
Ethernet
PoE+ Router
J
`
The Micro USB port of the product is provided for easier installation, and is not recommended for monitoring purposes.
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Powering and networking
Connect the PoE+ device with the PoE+ port of the camera.
J
`
Connect and use a PoE+ -enabled router.
`
Use a PoE+ device that complies with the IEEE 802.3at standard.
`
If you connect using an PoE+ -enabled router, you don’t need a separate power supply cable to power it on.