English _
15
!
INST
ALLA
TION & CONNECTION
[Installing network/power cables]
J
`
Use a cable bushing compliant with the network cable to be connected.
-
Camera main: use a cable with the diameter of Ø5 to 6.5
-
Components: use a cable with the diameter of Ø7 to 8.5
5-1.
Pull off the extruded parts of the cable bushing to be used.
5-2.
Route the network cable through the big hole of the cable bushing and connect to the network cable
connector.
5-3.
(When using the power) Route the power cable through the small hole of the cable bushing and connect
it to the provided power terminal block.
5-4.
Mount the cable bushing to the camera body.
5-5.
Connect the network cable connector to the PoE+ port, and connect the power terminal block to the
power port.
[Installing the network cable] (IP66)
6-1.
Pull off the extruded part of the 1-hole cable bushing provided.
6-2.
Use the cap installer to route the network cable through the cable bushing.
Summary of Contents for PNM-9031RV
Page 1: ...NETWORK CAMERA User Manual PNM 9031RV ...
Page 32: ......
