English _
11
!
INST
ALLA
TION & CONNECTION
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`
Before removing the Micro SD card, in <
Setup (
)
>-<
Event
>-<
Storage
>, set the device to <
Off
> and press the [
Apply
]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
Inserting a Micro SD card
1.
Remove the dome cover of the camera.
2.
Insert a Micro SD card in the arrow direction shown in the figure.
J
`
Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated.
`
Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
`
When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
`
Disassembly of the product cover should be finished within 5 minutes, or there will be the risk of internal dew condensation.
`
When installing/removing the Micro SD card, make sure you put the product body on a flat ground before working on it in
order to prevent accidents due to loss or drop of any parts.
Summary of Contents for PNM-9031RV
Page 1: ...NETWORK CAMERA User Manual PNM 9031RV ...
Page 32: ......
