Wisenet LRN-810S User Manual Download Page 34

Page: 34 / 123

34_

ExPORT SEARCH

You can search the exported data on the connected storage device. Only data saved in recorder file format when
exported will be retrieved.

Select <

Export search

> in the <

Search

> menu.

When you click <

Select storage device

>, the device search window is displayed. Click <

> to search for storage

device.

Click <

Search

Exported file information will be displayed.

●

Folder : Displays the folder where files are stored.

●

Name : Displays the saved file name.

●

CH : Displays the channel of the recorded video.

●

Time : Displays the start time and end time of the exported video.

●

Playback : Plays the exported video with an instant viewer.

If you double-click an item to play in the search list, the recorded video will be played.

ARb SEARCH

You can search auto-recovery backup data stored on ARB storage devices.

Select <

ARb search

> in the <

Search

> menu.

￭

For more information about ARB search, refer to the "

Setup

Setting the Device

Storage device

" page in the Table of Contents.

When you click <

Select storage device

>, the device search window is displayed. Click <

> to search for storage

device.
The model name of the ARB storage device will be displayed.

Click <

Search

The ARB file information stored on the device will be displayed.

●

Folder : Displays the folder where ARB data is stored.

●

Name : Displays the file name stored on the ARB device.

●

CH : Displays the recorded channel.

●

Time : Displays the start time and end time of the backed up video recording.

●

Playback : Plays the recorded video with an instant viewer.

If you double-click an item to play in the search list, the recorded video will be played.

Summary of Contents for LRN-810S




























































































































Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands

Wisenet LRN-810S, User Manual

Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands