Wisenet LRN-810S User Manual Download Page 104

Page: 104 / 123

104_

setup viewer

You can configure the Recorder settings remotely on the network.

SCREEN lAyOuT Of THE SETuP VIEWER

Name

Description

Menu

Click each menu to go to the menu screen.

Top menu list

Configure the settings or select a parent item to change the existing settings.

Sub-menu list

Among the sub-menus of selected parent menu, select a desired item to set.

Detailed Menu

Click desired item's input field to change and enter a desired value.

Apply the modified settings.

SETTINg THE CAMERA

You can check a list of cameras that are connected to the Recorder and configure the necessary settings.
For details, refer to the "

Setup

Setting the Camera

" page in the Table of Contents.

Register

You can add a network camera(s).

Setup > Camera > Register

Channel Setup

You can configure the video settings for each channel.

Setup > Camera > Channel setup

setup viewer

Summary of Contents for LRN-810S




























































































































Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands

Wisenet LRN-810S, User Manual

Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands