Wisenet LRN-810S User Manual Download Page 11

Page: 11 / 123

English

_11

Set the date, time, and daylight saving time on the <

Date & Time

> screen, and then click the <

Next

￭

The time zone setup might differ depending on the region that the product is released.

To set the recommended resolution on the <

Resolution

> screen, click <

Apply

> followed by the <

Next

> button.

￭

This function is not supported in some models.

On the <

Camera register

> screen, select a camera to register from the searched camera list and click <

Register

Select a camera to register from the list and click <

Change IP

After completing camera register click <

Next

￭

After entering the ID and password set in the camera, the connection test must be completed to successfully register.

On the <

Channel setup

> screen, you can view the camera videos registered to each channel in thumbnails along

with thumbnail information. To change the camera video position, select a video and drag and drop it to the desired
location.

Click <

finish

> to complete the Installation wizard.

•

TIN
g

ARTED

Summary of Contents for LRN-810S




























































































































Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands

Wisenet LRN-810S, User Manual

Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands