Wisenet LRN-810S User Manual Download Page 111

Page: 111 / 123

English

_111

S.M.A.R.T

You can check the connection status and details of the hard disk mounted in the recorder.

Monitor

You can set the information displayed on the monitor as well as the output system.

Setup > Device > Monitor

￭

If the screen does not work properly, see “

Troubleshooting (FAQ)

” in the Appendix.

￭

The Monitor Setup settings control the monitor connected to the Recorder.

￭

Video exceeding the resolution of 1080p will not be displayed from the secondary monitor.

Text

You can set the POS device text display and event text settings.

Setup > Device > Text

Device

Relevant values of a POS device connected to Recorder can be set.

Event

It is possible to set total amount conditions and keywords to display events of a POS device.

•

P VIE
WER

Summary of Contents for LRN-810S




























































































































Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands

Wisenet LRN-810S, User Manual

Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands