Wirepath WPS-100-DVR-8CH Owner'S Manual Download Page 95

Page: 95 / 115

WPS-100-DVR-8CH Installation and Users Manual

9.3.9 SEQ DISPLAY

The SEQ Display Setup allows the administrator to define the displayed pages when in SEQ Display mode.

Options include three display types:
  • 1-Window
  • 4-Window
  • 7-Window

The following is a brief description for each item in this menu and its specific operations:
• DEVICE TYPE

This DVR only support Main Monitor

• WINDOW TYPE

Select 1-W for one camera per page, 4-W for four cameras per page or 7-W for seven cameras per page.

• DWELL TIME

Set the dwell time (how long this page will be displayed before transitioning to the next page) from

3 to 60 seconds.

• TOTAL PAGES

Set total pages for this SEQ Display Type.

• PAGE NO

Select the page to be modified.

• CAMERA

Highlight the grid within the displayed page and select the camera number to appear in this grid.

Summary of Contents for WPS-100-DVR-8CH




















































































































Search results

Summary of Contents for WPS-100-DVR-8CH

Reviews:

Related manuals for WPS-100-DVR-8CH

Brands by name

Popular brands

Wirepath WPS-100-DVR-8CH, Owner'S Manual

Search results

Summary of Contents for WPS-100-DVR-8CH

Reviews:

Related manuals for WPS-100-DVR-8CH

Brands by name

Popular brands