WPS-300-NVR Installation Manual
Pg. 34
© 2013 Wirepath™ Surveillance
12.3.1.3-
Camera Video Setup
The settings in this menu relate to the resolution and performance of the connected Wirepath
™ device. The image maybe low quality,
or not appear at all if the setting is not supported. While experimentation is good, referring to the specifications for the device is the
best place to start before configuring these settings.
Resolution
Available Resolutions (High to Low Quality):
1920x1080
1280x720
640x480
320x240
176x144
Quality
Available Bit Rates (Low to High):
1Mbps
2Mbps
4Mbps
6Mbps
8Mbps
Note: While higher bitrates increase image quality, they also increase network traffic and may cause image
display issues when multiple devices are being accessed simultaneously.
Frame
Rate
Frame Rate (FPS) is adjustable from 5 to 30 in 5 frames per second intervals.
Recommendation:
We recommend that Frame Rate is set to 10 or 15 FPS, this will optimize performance
while maximizing storage space.
Faster frame rates will make the image appear more fluid as more information is produced each second. This may
have an adverse effect on network traffic, and may not be supported by the display device.
Slower frame rates will make the image appear less fluid as less information is produced each second. This may
cause the image to appear jagged
or “choppy” with fewer frames being transmitted.
Update
Updates the selected Wirepath camera with the current settings.
Exit
Returns to the Camera menu.
