WPS-300-NVR Installation Manual
Pg. 56
© 2013 Wirepath™ Surveillance
14.4.2-
Point-to-Point Protocol Over Ethernet (PPPoE) is a network protocol primarily used DSL (Digital
Subscriber Line) providers and modems. This protocol requires a login to connect to the
modem even when a router is used. Configuration of these settings is not required to operate
the camera on a standard network.
PPPoE
Enable to allow the NVR to access PPPoE for sending Email or saving
to FTP.
Username
Login name from the service provider
Password
Password for the above username.
Password
Confirm
Re-enter the password to confirm.
State
Current State of the PPPoE connection.
Send Mail After
Dialed
Enable to send an Email when the PPPoE is dialed.
Subject
Enter text to use as the subject line of the email.
14.4.3-
DDNS (Dynamic DNS) maps Internet Domain Names to an IP through services like
Wirepathdns.com. When configured, the CameraNVR is available remotely via a simple easy
to remember name such as JonesIPNVR.Wirepathdns.com
D. Configuring DDNS is not required for remote access, but avoids having to pay for and
remember a static IP address from the ISP.
See step
6-Configure NVR for Remote Access
DDNS
Enable to allow configuring and using a DDNS service.
Provider
Name of the DDNS service provider.
Hostname
Name to use when accessing the Camera remotely.
Example: JonesIPNVR.
Update Interval
Time interval in minutes to update the DDNS service with current
external IP address. (1440 = every 24 hours)
State
Current connection status of the DDNS service.
This field will update automatically shortly after entering and applying a
Hostname.
