WPS-300-NVR Installation Manual
Pg. 48
© 2013 Wirepath™ Surveillance
14.1.6- Privacy Mask Area Setup
Opens when the Privacy Mask Area Setup is selected in the Privacy Mask Setup Menu.
To Set An Area For Masking
A. Place the mouse at the upper left hand corner of the area to mask, hold down the left mouse
button and drag the box over the area, and release the mouse button.
Note:
If the entire camera image is desired for masking, click the right mouse button and select
Enable All from the menu.
B. After selecting the area, click the right mouse button and select Save and Exit to set the area.
Removing the Area for Masking
A. Right mouse button and select Clear All from the menu.
Exit Without Saving
A. Right click and select Exit Without Saving to abandon changes and return to the Privacy Mask
Setup menu.
14.1.7- Camera Audio Setup Menu
Channel 1-9, or 1-
16 Checkboxes
When selected, audio for the selected channel(s) is active.
