WPS-300-NVR Installation Manual
Pg. 42
© 2013 Wirepath™ Surveillance
13.2- Single Image Controls
When viewing a single image, controls for Audio, and PTZ notification will appear in the upper right hand corner of the image.
1
2
3
1.
Camera Audio
Turns the cameras microphone input On and Off of the selected channel.
When turned on, the local audio output is also turned on.
2. Audio Out
Turns the NVR Audio In On or Off to send audio to the selected channel.
3. PTZ Indicator
Illuminates when PTZ controls are On for the selected channel. This will only
appear when a PTZ camera is selected.
13.3- PTZ Camera Controls
1
2
6
7
8
9
10
11
12
13
3
4
5
14
1. Navigation Buttons
Up, Down, Left and Right and Diagonals.
4. Home
Returns camera to the preset Home position.
5. Auto Pan
Starts auto panning of the camera from the
pointer selected in Pan Start Pointer.
6. Stop
Stops Auto Pan and Patrol.
7. Patrol
Steps the camera through the saved preset
locations.
8. Zoom
Adjusts the Zoom in and out of the camera image.
9. Focus
Adjusts the focus of the camera image.
10. Speed
Sets the speed for navigation buttons.
11. Preset Pointer
List of numbered presets to move the camera to
commonly used areas of interest.
12. Preset Edit
Go
Starts selected preset.
Save
Saves the current location, and zoom to the
selected preset number.
DEL
Deletes the currently selected preset.
13. Channel
List of NVR channels with PTZ-capable devices,
to switch focus of the current view.
14. Control Mode
Single-Step or Continuous.
15. Pan Start Pointer
Preset pointer to use to start Auto Pan.
16. Pan Stop Pointer
Preset pointer to use to stop Auto Pan
