WPS-300-NVR Installation Manual
Pg. 43
www.snapav.com Support: 866.838.5052
14- Local Configuration Menu
The local and browser configuration menus contain the same settings for the NVR. Changes to settings are synced in real time and are
available in both menus as they are made.
14.1-
Camera Menu
14.1.1-
Channel Tabs
Selects channels 1 to 4 9 (or 16) to allow connection.
Camera Quick
Search
Opens the Camera Quick Search menu that provides a list of IP cameras and
encoders connected to the network.
See section
14.1.1.1-Camera Quick Search Menu
Mode
Connection mode to the camera or encoder.
Normal Standard connection to a Wirepath IP Camera or Encoder.
RTSP
Connects to an RTSP video source.
Enable
Checkbox
Enables the channel for viewing on the NVR.
IP Address
Current IP Address of the Camera. If DHCP is selected, this cannot be
configured, and will appear Grayed out.
Note: The static IP used must be outside the DHCP range of the router to
avoid conflicts with other devices on the network.
Port
Port used by the Camera or Encoder on the network.
User Name
Account used to log into the Wirepath IP Camera or Encoder
Note: An Administrator account must be used to connect to a Wirepath
Camera or Encoder, access streaming video, and make and save
changes to camera settings.
Password
Password for the above account.
Connect
Camera
Connects to the camera and assigns to the selected channel.
