Wintriss Shadow VI, User Manual

Page: 88 / 159

1107200 Shadow VI User Manual
page 76 Chapter 3 Fixed and Floating Blanking
5. Press down firmly on the slave blanking window so that it lines up between the alignment
indicators on either side of the receiver. Make sure that the pins in the slave blanking
window fit properly into the mating connector holes on the top of the master. If you need
to adjust the blanking window back up, press down on the top of the receiver end cap as
you push the slave upward.
6. Retighten the thumbscrew on the slave window so it fits firmly into the mating hole.
Notice that there is no cable or cable connection that needs to be made for the slave.
7. If you need a larger blanked area, you can add another slave window (up to 4 slaves).
Repeat the previous steps. Remember to remove the 2 tiny plastic coverings at the top of
the lower slave window. Then carefully fit the pins at the upper slave window into the
mating holes at the lower one.