The “Con fig ure New Adapter Manu ally” pres ents a screen simi lar to the one shown be low :
Use the up and down ar row keys and tab key to change the dis played con figu ra tion to what is de
-
sired and then se lect “Save Con figu ra tion” to pro gram the EE PROM with the se lected choices.
NOTE : PLUSCFG will not al low se lec tion of I/O ports, in ter rupts, or mem ory ad dresses that it be -
lieves are be ing used by other hard ware in the sys tem. If PLUSCFG re fuses to al low a de sired se lec tion
for what you know are valid choices, it will be nec es sary to use the “jumpered” mode, de scribed ear lier,
for con figu ra tion.
2.22.11
Dis play/Change Adapter Con figu ra tion
This op tion of the main menu pres ents the same screen as shown for “Con fig ure New Adapter
Manu ally”. Use the up and down ar row keys and the Tab key to al ter the con figu ra tion as de sired and
then se lect “Save Con figu ra tion” to pro gram the EE PROM with the new in for ma tion.
NOTE : PLUSCFG will not al low se lec tion of I/O ports, in ter rupts, or mem ory ad dresses that it be -
lieves are be ing used by other hard ware in the sys tem. If PLUSCFG re fuses to al low a de sired se lec tion
for what you know are valid choices, it will be nec es sary to use the “jumpered” mode, de scribed ear lier,
for con figu ra tion.
991206
OPERATIONS MANUAL LBC-Plus
Page 2 - 37
WinSystems - "The Embedded Systems Authority"
WinSystems
Thick/Thin/TPI
August 20, 1993 11:34PM
PLUSCFG V1.17
AT/LANTIC
Configuration
Software
CONFIGURATION
AT/LANTIC ADAPTERS
CONFIGURE NEW ADAPTER MANUALLY
Novell Configuration - None
I/O Base Address - 0x240
Interrupt assignment - IRQ3
Physical Media - TPI (10BaseT)
Adapter Architecture - I/O Port
Boot Prom - No Boot Prom
Advanced Configuration Options
Temporarily Change Configuration
Save Configuration
Return to previous menu
******* Make Selection using arrow keys and <enter> *******
******* Scroll through options using <tab> *******
