SECTION 4 –
APPLIANCES AND SYSTEMS
4-8
Further Information
Refer to the manufacturer’s user guide
provided in your InfoCase for important
information on how this system operates under
several conditions, whether 20-amp, 30-amp, or
50-amp connections.
WATER HEATER – GAS
TANKLESS WITH
DECALCIFICATION
–If Equipped
The Gas Water Heater operates from propane
gas. In Comfort mode, the recirculation pump
inside the water heater recirculates the hot water
in the lines to ensure instant hot water at any
faucet. To conserve propane gas and power,
choose the Economy mode.
See the Water Heater manufacturer’s
operation manual provided in your InfoCase for
complete operating instructions, safety
warnings, decalcification instructions, and
maintenance information before operating the
Water Heater.
1.
Be sure the Water Heater is filled with
water before starting the Water Heater.
To
fill the Water Heater, turn the Water Pump
switch ON and open water faucets anywhere
in the motorhome. When water begins to flow
steadily from the faucet, the Water Heater is
full. Close all water faucets.
2.
Turn on the Water Heater:
Turn “ON” the
Water Heater Power Switch (located behind
the water heater access panel on exterior of
motorhome) by pressing up or down. When
the water heater is on, a green light will
illuminate above the switch.
NOTE: Both on positions on the power switch
have the same function.
“AC” Screen
(Located on multiplex monitor panel)
• Press the AC button, then select EMS Load
Status.
-Typical View
EMS Load Status
(Located on multiplex monitor panel)
-Typical View
