SECTION 3 –
DRIVING YOUR MOTORHOME
3-22
Always replace plug-in type fuses with those
of the same amperage size.
See the chassis manufacturer’s fuse allocation
chart on the inside of the fuse block cover.
Further Information
See your chassis manual in your InfoCase for
further information about chassis supplied fuses
and relays.
WINDSHIELD WASHERS AND
WIPERS
The Windshield Washer Fluid Reservoir is
located behind the front hood panel (see “Front
Service Access” elsewhere in this section for
instructions on opening the hood panel).
We recommend using commercially available
premixed solutions for best results. Avoid using
water in freezing temperatures, as the washer
pump could become damaged.
TIRES
Improper tire pressure can result in tire
overloading and abnormal wear and also affects
handling, ride characteristics, and fuel economy.
SUSPENSION ALIGNMENT
AND TIRE BALANCE
The front suspension and steering system of
this vehicle was factory aligned using highly
accurate equipment prior to delivery to the
dealership. However, alignment should be
checked and adjusted after you have fully loaded
the motorhome according to your personal needs.
Thereafter, the alignment should be periodically
inspected to help prevent uneven tire wear.
Any excessive or abnormal tire wear may
indicate worn or misaligned suspension or
steering, unbalanced tire, or other tire/suspension
problem.
Automotive Circuit Breakers (push to reset)
• Breakers are labeled for components equipped
Automotive Fuses (cover removed)
Fuse Diagram (inside of cover)
WARNING
Make sure all replacement tires are of the
same size and rating as those shown on
your Vehicle Certification Label.
