SECTION 3 –
DRIVING YOUR MOTORHOME
3-16
Engine Access Cover Locations
Model 34T:
•
Forward Engine Access Cover, Support
Angle, and Vertical Access Cover - Lift the
foot of the bed board.
•
Rearward Engine Access Cover - Remove the
top of the rearward bed board.
Model 36H:
•
Forward Engine Access Cover and Support
Angle: In the bedroom floor in front of the
wardrobe.
•
Vertical Access Cover - Remove the cabinet
access panel on rear wardrobe face.
•
Rearward Engine Access Cover - Remove
access panel inside wardrobe.
Model 38F, 38W, and 38D:
•
Forward Engine Access Cover and Support
Angle: In the lavatory floor in front of the
lavatory cabinet.
•
Vertical Access Cover - Remove the access
panel on rear lavatory cabinet face.
•
Rearward Engine Access Cover - Remove
lavatory cabinet drawers and access panels
inside lavatory cabinet.
Forward Engine Access Cover
1.
For Model 34T:
Lift the bed board.
For Models 36H, 38F, 38W, and 38D:
Remove rear bath rug (if equipped) and set
aside.
2. Using the Engine Cover Latch Key (located
on your key ring), unlock the Engine Cover
Latches by turning counter-clockwise.
3. Using a Suction Cup Lift (if needed), remove
unlocked Forward Engine Access Cover and
set aside.
NOTE: Use care when removing the Engine
Access Cover to avoid possible interior
damage.
In some cases, you may need further access of
the engine (beyond removing the Forward
Engine Access Cover, as previously described.).
To gain further access to the engine continue
with the next steps. If no further access is needed,
reinstall the Forward Engine Access Cover
ensuring the latch is in the locked position.
Engine Cover Support Angle
4. To Remove the Engine Cover Support Angle,
remove two (2) screws from the angle and set
aside.
Engine Cover Latch Key
(Located on key ring)
Engine
Cover
Latches
*Model 38W shown