8-1
5
-
DASH
/ A
UT
O
SECTION 8 – ENTERTAINMENT
AUDIO/VIDEO SYSTEM BASIC
OPERATION
NOTE: For your convenience, we have also
included a handy, tear-out version of this
“A/V System Basic Operation” guide in
Section 8 of your Operator’s Manual
Supplement.
See your InfoCase for specific operating
guides for audio and video components.
BLU-RAY
™
PLAYER AND
SOUND BAR SYSTEM
–If Equipped
The Blu-ray
™
Player and Sound Bar System
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped). The TV is connected to
the Sound Bar and Blu-ray player.
To Watch a Blu-ray:
1. Turn “ON” the TV, Sound Bar, and Blu-ray
player.
2. Set TV Input to HDMI1 by using the TV
remote or the controls on the TV.
3. Set Sound Bar Source to Optical input by
using the Sound Bar remote.
4. Insert Blu-ray into the player. Blu-ray will
begin to load automatically.
5. The Blu-ray may load directly to the
main title/menu screen or it may
begin to play previews. You may be able to
skip previews if desired by pressing the
chapter “skip” button on the Blu-ray player
remote until you see the main menu screen.
6. When the main menu screen appears, use the
arrow buttons on the Blu-ray player remote to
select the desired entry or press the “Enter”
button on the Blu-ray player remote to begin
playing the feature.
TV Sound through the Sound Bar
(Lounge TV Only)
When watching TV programs (broadcast,
cable, or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to the Sound Bar for a
richer sound quality, follow these steps:
•
Turn “ON” the TV and Sound Bar.
•
Select the TV channel you wish to watch.
•
Press the “Source” button on the Sound Bar
remote until the display reads “D.IN”.
•
Turn Sound Bar volume up or down.
Listen to Music stored on a
Bluetooth device
•
Press the “Source” button on the top panel of
the Sound Bar or on the Sound Bar remote
until display reads “BT”.
•
On your Bluetooth device, perform the
pairing operation. A list of devices found will
appear on your device. Select the Sound Bar.
•
Enter the PIN code 0000 (if required).
•
When the devices are paired, the Sound Bar
will display the device name.
•
Turn the Sound Bar volume up or down.
Turning TV Speakers On/Off
TV speakers can be turned off to prevent an
echo effect when using an external speaker
(sound bar). Every TV is slightly different, refer
to the TV manufacturer’s user guide provided in
your InfoCase for detailed instructions on turning
TV speakers off.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for complete feature descriptions
and operating instructions.
