8-3
SECTION 8 –
ENTERTAINMENT
TV SIGNAL AMPLIFIER
The TV Signal Amplifier is built into the
antenna and can be turned on or off with a power
switch.
An indicator light will illuminate when the
switch is on and the signal amplifier is active.
SATELLITE DISH AND CABLE
TV CONNECTIONS (INPUT)
The portable satellite dish and cable television
input connectors are located in the utility
compartment, shoreline compartment, or water
service center, depending on model.
To receive a cable signal, turn off the TV
Signal Amplifier.
TV DIGITAL SATELLITE
SYSTEM WIRING
Your motorhome is pre-wired for installation
of a digital satellite TV system. Coaxial cable and
high definition component cable connections are
available to hook up your satellite receiver and
are located in the entertainment center cabinet.
A second connection may be included inside a
cabinet in the bedroom for the rear TV (if
equipped).
See your authorized Winnebago Industries
®
dealer for proper installation and sealing of roof
mounted components.
NOTE: Your motorhome is pre-wired with two
satellite dish coaxial cables from the
roof-mounted satellite dish. Both cables
TV Signal Amplifier Power Switch
(Located in an overhead cabinet or mounted
on a wall near the TV)
-Typical View
• Power
Switch
Satellite Dish and Cable TV Connections
(Located in utility compartment, shoreline
compartment, or water service center,
depending on model)
-Typical View
Interior Satellite Dish Connections
(Located in the entertainment center cabinet)
-Typical View
