SECTION 9 –
FURNITURE AND SOFTGOODS
9-10
2. Remove panel and set aside.
3. Remove Loft Bed manual retractor from
InfoCase.
4. Insert manual retractor into loft bed motor (as
shown) and turn clockwise to raise the loft bed
into stored position.
5. Turn the key (located near the loft bed or
monitor panel, depending on model) to the
“OFF” position.
6. Fasten the safety belt whenever the bed is in
the stored position.
Loft Bed Ladder
The top of the loft bed ladder must be hooked
onto the brackets on the rear edge of the loft bed
for use. The bunk ladder is stored within the
bedroom area of the motorhome.
Before Using Loft Bed Ladder
•
Inspect the ladder
to make sure it is not
damaged. Never use a damaged ladder.
•
Keep the rungs of the ladder clean and dry
while in use. Do not step onto the rungs if the
rungs are wet, or if your shoes are wet or carry
debris that could result in a loss of footing.
CAUTION
To avoid injury, never use the loft bed
ladder in any other manner or for any
other purpose than described in the
following instructions.
