WinGD X92DF Operation Manual Download Page 68

Page: 68 / 608

3.2

Use of the engine

3.2.1

Intended use

The engine is intended to drive a propeller of a vessel. The engine changes the chemical
energy of the fuel to mechanical energy.

The engine must only be used in the operating range as given in the data sheets, refer to
chapter 11.

Related to the contract the Contract Maximum Continuous Rating (CMCR) is specified in the
range of

Figure 3-3

. The points R1+ and R2+ are only applicable, if the engine has an extended

range.

Fig 3-3

Operating range

R1 R1+

R2 R2+

Legend

Highest power at highest speed

Highest power at lowest speed

R1+ Highest power at highest speed (extended)

Lowest power at lowest speed

Lowest power at highest speed

Power

R2+ Lowest power at highest speed (extended)

Speed

The intended use of the engine includes the items that follow:

•

Obey this Operation Manual.

•

Obey the related safety regulations.

•

Obey the instructions of the operating company.

•

Operate the engine in the specified limits.

•

Use the correct operating media.

X92DF

AA00-0000-00AAA-020C-A

Operation Manual

Use of the engine

Winterthur Gas & Diesel Ltd.

- 68 -

Issue 002 2020-08

Summary of Contents for X92DF

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X92DF

Reviews:

Related manuals for X92DF

Brands by name

Popular brands

WinGD X92DF, Operation Manual

Search results

Summary of Contents for X92DF

Reviews:

Related manuals for X92DF

Brands by name

Popular brands