PROCEDURE
1
To change-over from liquid fuel to gas, do as follows:
1.1
Make sure that the engine operates with MDO.
1.2
On the related control panel start the gas mode request.
NOTE:
The ECS makes a test, if gas mode is available. Then the ECS sends
a signal to the gas pressure control system. This system automatically
starts the transfer preparation. When this transfer procedure is
finished, the ECS slowly changes to gas mode.
2
To change-over from gas to liquid fuel, do as follows:
2.1
On the related control panel start the diesel mode request.
NOTE:
The ECS quickly changes from gas to MDO operation.
CLOSE UP
•
None
X92DF
AA00-0000-00AAA-131J-A
Operation Manual
Change-over to and from gas
Winterthur Gas & Diesel Ltd.
- 469 -
Issue 002 2020-08
