WinGD X92DF Operation Manual Download Page 385

Page: 385 / 608

PROCEDURE

Fig 6-54

MCP page - MAIN locked

001

002

Legend

001

UNLOCK button

002

Navigation field

To unlock the function buttons, do the steps that follow:

1.1

Touch the UNLOCK button (001,

Figure 6-54

) with your finger.

1.2

Hold the finger on the button until the green circle is complete.

1.3

Release the finger.

To start a function with a function button, shortly touch the related function button.

NOTE:

When the function is active, the LED indication comes on.

NOTE:

You only can start one function at the same time, also when you touch two or
more function buttons.

To change the control location, do the steps that follow:

3.1

Shortly touch the function button for the related control location.

3.2

If necessary, confirm the transfer on the related MCP.

To change between MCP pages, do the steps that follow:

4.1

Shortly touch the related button in the navigation menu (002).

4.2

If applicable, shortly touch the related sub menu button.

X92DF

AA00-4618-00AAC-131A-A

Operation Manual

Operate the manual control panel (MCP)

Winterthur Gas & Diesel Ltd.

- 385 -

Issue 002 2020-08

Summary of Contents for X92DF

































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for X92DF

Reviews:

Related manuals for X92DF

Brands by name

Popular brands

WinGD X92DF, Operation Manual

Search results

Summary of Contents for X92DF

Reviews:

Related manuals for X92DF

Brands by name

Popular brands