Setting up the Printer
Check the packing list
Save all packing materials in case you need to repack the printer for
shipping or storage. Before installation, check that all the items on this list
have been shipped (printers shipped in bulk may not include all these
items):
n
Printer (enclosed in a plastic bag with foam pack)
n
Thermal receipt sample paper roll (inside receipt bucket)
n
Test printout protecting the printhead (inside receipt bucket)
n
Cardboard support for cantilever (on slip table)
n
Foam restraint for carriage (behind front cover)
n
Ribbon cassette
n
TH420 Two-Color Thermal Receipt and Impact Slip Printer: Setup Guide
To report any missing materials, or to report a printer that was damaged
during shipping, call your supplier.
Remove the packing restraints
n
Open the front cover, remove the foam restraint holding the carriage (1).
n
Remove the cardboard support (2) from the slip path.
n
Open the receipt cover (3).
n
Remove the test printout (4).
n
Lift the sample thermal paper roll out of the paper bucket and remove the
paper roll supports (5).
15
CHECK THE PACKING LIST
