n
The slip form should be flat and void of curls or wrinkles, especially at the
top.
n
Considerations for glued edges on slip paper
No glue on bottom edge (1).
Right or top edge (2): Paper feeding and insertion are affected by gluing
method, length of edge, and quality of glue used.
n
Left edge or wide slip paper (3): Skewing may occur.
The Slip/LED sensors use a reflective photo sensor.
n
Do not use paper that has holes or is translucent at the Slip/LED sensor
location. (See “A” in above illustration.)
n
Do not use paper that has holes on dark areas with low reflection (less
than 60% reflection) at the slip sensor location. (See “B” in above
illustration.)
n
Thin paper should be used between the top and bottom sheets of
multi-ply paper. Thick paper reduces the copy capability.
SLIP FORMS - RE COM MEN DA TIONS
54
Slip
sensor
MICR
head
19 mm (0.747")
8 mm (0.315")
Slip/LED
sen sor
Slip side
guide
6 mm (0.236")
Sli de edge
Pa per ho les and low
re flec ti on pro hi bi ted areas
Pa per feed
direction
B A
