Winbook SI, User Manual

Page: 82 / 216

You may have noticed that there is a fax driver in
your printer choices if you have installed fax soft-
ware. You can select the fax board as a printer device
for any Windows-based documentation that you are
running in Windows. The document will be sent to
the fax board just as it would be sent to the printer.
Installing a Printer for Windows 2000
In order to use your printer with your WinBook
Si2, you will need to load the necessary software
and drivers for that printer. If your printer came
with an installation disk, you can follow the instruc-
tions provided by the printer manufacturer. If not,
you can follow the instructions below:
1. Start the Add Printer Wizard (Start/Settings/Printers and then double
click on Add New Printer). (Figure 4.15)
2. Once the Add Printer Wizard has started, click Next. (Figure 4.16)
Series
User’s Manual
4.12
Figure 4.14: Print Test Page
You do not need to
have a printer physically
present to install the
Windows drivers for it. If you
will be using another printer or
might be transferring informa-
tion to another site (such as
work or home) where you will
be using another printer, you
can set up Windows for those
printers (so that files you are
working on can be set up
for that printer). If the printer is
one you will be connecting to
your computer, you will want
to set up the proper port con-
nections for this printer. If the
printer is one you will be using
elsewhere, you can set up the
printer on the location “File.”
Figure 4.15: Adding a Printer in Windows 2000
Si Series Manual 2/18/00 4:09 PM Page 84