manualshive.com logo in svg

Winbook SI, User Manual

Share
Download
Winbook SI User Manual Download Page 151

Booting Up

PROBLEM: System reports an error message that is not related 
to any setup problems.

ACTIONS: 

•

Your system may have a virus which has infected the master boot
record. Boot from a clean (uninfected and write-protected) floppy disk
or from a bootable CD and run a virus checking software to find and
remove the virus.

•

Write down the message and call Technical Support at the number 
listed on the “Read Me First” card that was included with your system.

PROBLEM: System prompts for a password on boot.

ACTIONS: 

•

Boot password has been enabled. Type in your password to continue. 
If you have lost the password or the password has been enabled by 
accident, call Technical Support.

PROBLEM: System will not accept my password.

ACTIONS: 

•

Check the System Status LEDs to be sure that the Num Lock and/or 
Caps Lock are not activated.

•

If you have forgotten your password, there is no easy way to recover the
password. You will need to return the computer to WinBook for service.

Series

User’s Manual

9.6

Si Series Manual  2/18/00 4:09 PM  Page 154

Summary of Contents for SI

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands