Insert
Delete
Cursor
Page
The functions of editing keys vary according to the software in use. Refer to the appropriate
software
User’s Guide
for definitions of the following editing keys.
Insert Key:
Text editors and word processor programs generally use this key for inserting
text and other data into a passage of text.
Delete Keys:
This key is used by most programs to delete data.
Cursor Keys:
These 4 keys (also called direction keys) are located at the lower right hand
corner of the keyboard and are marked by 4 arrows pointing in 4 directions. In some
programs, the arrows indicated the direction the cursor moves when the keys are pressed.
Page keys:
Hold down the <Fn> key when using the page keys. Word processor programs
commonly use these keys to move the cursor the width and length of an entire page.
[FX 2-11]
Numeric Keypad
The embedded numeric keypad consists of a set of 15 keys that make number intensive input
more convenient. These keys have both numeric and cursor movement functions. Numeric
assignments are found on the lower right of each key.
The functions of the keypad vary according to the <Num Lock> and <Shift> key combinations.
To activate the keypad, refer to the following table for various key combinations and their
results.
Numeric Keypad Combinations
Miscellaneous Keys
Most of the keys covered in this section have software specific functions. For more detailed
Summary of Contents for FX
Page 26: ...FX Chapter 3 ...
Page 123: ......