Winbook FX, User Manual

Page: 78 / 123

The Setup Program allows you to specify 2 separate passwords, a Supervisor password and a
User password.
Passwords are not case sensitive so you can enter a password using either upper or lower case
letters.
Supervisor Password
When enabled, the Supervisor password is required for entering the Setup Program. This is a
display-only field.
User Password
When enabled, the User password restricts access o the Setup Program. This is the display-only
field.[FX 9-22]
Set Supervisor Password
This field allows you to set the Supervisor password. To set the Supervisor password, highlight
the field and press the <Enter> key. The following dialog box appears:
Set Supervisor Password
Enter new Password: [ ]
Re-enter new [ ]
Password :
Type the password and press the <Enter> key. You can type up to 7 alphanumeric characters.
The system ignores symbols and other keys.
To confirm the password, type the password again and press the <Enter> key. The Supervisor
password is now set. This password allows full access to the Setup Program menus.
WARNING: Write down your password. If you lose your password, you will be locked out.
There is no way to clear or retrieve passwords once they are saved. If you lose your password,
you must send the WinBook FX to us for service in order to unlock the password.
Set User Password
This field allows you to set the User password. To set the User password, follow the same
procedures as those for setting the Supervisor password. The User password allows restricted
access to the Setup Program. This password also requires that the Supervisor password be set
prior to resetting the User password.
Password on Boot