Winbook FX User Manual Download Page 96 | Manualshive

Page: 96 / 123

background image

Proper connection to an AC power source is essential for charging the WinBook FX’s battery
modules. The AC adapter requires three connections:

Connect the AC Adapter cord to the connector socket on the side of the WinBook FX.
Connect the adapter’s supply cord into the adapter.

Connect the adapter’s supply cord to an electrical outlet. If power is reaching the
adapter, the adapter’s green LED will be illuminated.

Battery

You must charge the battery for the WinBook FX to operate on battery power. It takes about 4
hours to fully charge the primary battery with the system off. The WinBook FX should run for at
least 2 hours on a fully charged primary battery.

Occasionally it is important to allow the battery to fully discharge before completely recharging
it. A complete discharge and recharge is called "cycling" the battery. Not only will this cause
your WinBook FX to operate longer on battery power, but it will also extend the battery’s total
life.

You should perform a battery cycle once every 32 times that you plug the WinBook FX into an
AC power source to recharge the battery. The WinBook FX will display a message in the Popup
window when it is time to do this. The message will be: BAT 1 (or BAT 2) GAUGE UNSURE!
Follow the steps below to cycle the battery.[FX 10-19]

Cycling the Battery

Fully charge the battery for at least 4 hours with the system off.
Turn off all Power Management by using the Setup Program (see Chapter 9,

Using the Setup

Program

) or by pressing the <Fn> + <F5> keys at the same time.

Disconnect the AC adapter.
Discharge the battery by keeping the WinBook FX on until the battery is totally discharged.
To speed this up, you may want to run your favorite game program in "demo" mode to use
more power.
After the system automatically powers off from the low battery charge, fully charge the
battery. The battery indictor in the Popup window is now recalibrated and its indication
should be reliable.

RESTART OR BOOT

Probably, the most common way to solve simple problems with the WinBook FX is to restart it.
Though restarting the WinBook FX can correct problems with operation, you will lose any
changes that you make to your files since the last time you saved your work. It’s a good idea to
save your work at frequent intervals in case you have to restart unexpectedly.

WANING:

If you restart your WinBook FX without saving active files or work that you have

recently done, you may lose the data that is stored in system memory. It is advisable to save any
work and close all files before you attempt to restart your computer as described below.

«
...
94
95
96
97
98
...
»

Summary of Contents for FX




























































































































Reviews:

No comments

Related manuals for FX

Brand: IBM Pages: 222

TURNCONNECT T101

Brand: jp.ik Pages: 2

Inspiron 24 5410 All-in-One

Brand: Dell Pages: 27

Inspiron 17 7000 Series

Brand: Dell Pages: 2

Brand: Dell Pages: 77

Inspiron 16 Plus 7620

Brand: Dell Pages: 26

Inspiron 17 7000 Series

Brand: Dell Pages: 23

Brand: Dell Pages: 222

Brand: Dell Pages: 88

Inspiron 16 Plus 7620

Brand: Dell Pages: 69

Inspiron 17R 5737

Brand: Dell Pages: 1

Brand: NEC Pages: 89

Packard Bell EasyNote M5

Brand: NEC Pages: 28

Brand: NEC Pages: 47

VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION

Brand: NEC Pages: 4

ShieldPRO FC-N21S

Brand: NEC Pages: 16

Brand: NEC Pages: 20

Brand: NEC Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands