Winbook FX User Manual Download Page 102 | Manualshive

Page: 102 / 123

background image

The display stays blank when I turn on my WinBook FX and I didn’t hear any beeps.
The LCD indicator panel next to the power button shows symbols.

Your display may be turned off. Press <Fn> + <F1> to turn the display back on. These keys
will cause both the internal display and external monitor to turn on and off.

You may have switched to external monitor with <Fn> + <F12> as you booted, or set the
display as "CRT" in the Setup Program.
If you are using a port replicator, mini-dock, or docking station, undock the WinBook FX
and retry.

BLANK DISPLAY WHEN TURNED ON, SINGLE BEEP

The display stays blank when I turn on my WinBook FX. I heard a single beep.

Check the brightness settings for your display. Make sure the brightness control is at the
midpoint setting.

Press <Fn> + <3> to decrease brightness.

Press <Fn> + <4> to increase brightness.[FX 10-29]

BLANK DISPLAY WHEN TURNED ON, SERIES OR CONTINUOUS BEEP

The display stays blank when I turn on my WinBook FX and I hear a series of beeps or
a long continuous beep.

If you just installed optional disk drives, PCMCIA cards, a second battery, or memory
modules, try removing them. After removing the newly installed component, try rebooting
the WinBook FX (see "Restart or Boot" under Fast Fixes).

If the WinBook FX starts up normally, turn the computer’s power off and try to
reinstall the component (see "properly Install Accessories" under Fast Fixes). Refer to
the installation procedure that came with the newly installed component.

If you are using a port replicator, mini-dock, or docking station, undock the WinBook FX
and retry.

BLANK DISPLAY AFTER USE, LCD INDICATOR SHOWS SYMBOLS

I was using my WinBook FX, and then I stopped using it for some time. The computer’s
screen is now blank but the LCD indicator panel next to the power button shows
symbols.

You may have turned off your WinBook FX’s display. Press <Fn> + <F1> to turn the display
back on. These keys cause both the internal display and external monitor to turn on and off.
You may have switched the screen to an external CRT, even though one is not connected.
Press <Fn> + <F12> to switch between the internal display and the external monitor.
You may have loaded a virus onto your WinBook FX’s hard disk drive (see "Viruses" in
Chapter 8,

Security

).

If you are using a port replicator, mini-dock, or docking station, undock the WinBook FX

«
...
100
101
102
103
104
...
»

Summary of Contents for FX




























































































































Reviews:

No comments

Related manuals for FX

Brand: Medion Pages: 90

Galaxy Book Pro NP935XDB-KC1UK

Brand: Samsung Pages: 105

4720-4721 - Aspire

Brand: Acer Pages: 113

4720 6011 - TravelMate

Brand: Acer Pages: 101

Brand: Acer Pages: 98

Brand: Acer Pages: 104

1410 2039 - Aspire

Brand: Acer Pages: 104

1410 2039 - Aspire

Brand: Acer Pages: 129

Brand: Acer Pages: 96

Brand: Acer Pages: 218

5515 5879 - Aspire - Athlon 1.6 GHz

Brand: Acer Pages: 177

4672WLMi - TravelMate - Core Duo 1.66 GHz

Brand: Acer Pages: 62

Brand: Acer Pages: 105

Brand: Acer Pages: 102

Brand: Acer Pages: 332

2011 Aspire Series

Brand: Acer Pages: 316

1642WLMi - Aspire - Pentium M 1.73 GHz

Brand: Acer Pages: 87

4730 6764 - TravelMate

Brand: Acer Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands