My WinBook FX won’t turn on when I press the power button.
Make sure that the battery is inserted into its bay and that it is connected properly (see
"Properly Install Accessories" under Fast Fixes).
Be sure the AC adapter connectors are fully plugged into the wall outlet and that the battery
is fully charged (see "check Power Inputs" under Fast Fixes).
Make sure that the wall outlet is not defective by plugging something else (such as a lamp)
into the outlet to check it.
WINBOOK FX TURNS OFF BY ITSELF
My WinBook FX turns off by itself.
Check the Setup Program power savings timeout settings. Pay particular attention to Suspend
timeout, Suspend on low battery, and Standby timeout settings as each of these can cause the
system to [FX 10-27] shut down or appear to be shut down. For information about entering
the Setup Program menus, see "Check the Setup Program Settings" under Fast Fixes. Also
see Chapter 9,
Using the Setup Program,
for more information about power savings settings.
OPERATION TIME ON BATTERY TOO SHORT
The WinBook FX doesn’t operate on the battery for a long enough time.
Check the battery charge. Your battery may not be fully charged. Try charging the battery by
plugging the AC adapter or optional car adapter into the WinBook FX (see "Check Power
Inputs" under Fast Fixes).
You may need to do a full battery cycle. If you notice that even with a full charge you can’t
operate the WinBook FX for at least 2 hours, allow the WinBook FX’s battery to completely
discharge. Then plug the AC adapter into the WinBook FX and allow it to charge overnight
(see "Check Power Inputs" under Fast Fixes).
If the problem continues, it may be time to purchase a new battery. Contact the Sales
Department by calling the number listed on the "Read-Me-First" card that came with your
system.[FX 10-28]
DISPLAY
BLANK DISPLAY WHEN TURNED ON, NOT BEEPS, LCD INDICATOR BLANK
The display stays blank when I turn on my WinBook FX and I didn’t hear any beeps.
The LCD indicator next to the power button is also blank.
Check all of the WinBook FX’s power input sources (see "Check Power Input" under Fast
Fixes).
If you are using a port replicator, mini-dock, or docking station, undock the WinBook FX
and retry.
BLANK DISPLAY WHEN TURNED ON, NO BEEPS, LCD INDICATOR SHOWS
SYMBOLS
Summary of Contents for FX
Page 26: ...FX Chapter 3 ...
Page 123: ......