Pressing the <Esc> key does not exit this menu. You must select one of the options from
this menu or a Menu Bar item to exit.
EXIT MENU FIELDS
Exit Without Saving Changes
Save Changes and Exit
Get Default Values
Load Previous Values
Save Changes
Exit Without Saving Changes
Only use this option from the Exit menu if you do not want to save the changes you have made
in the Setup Program. When the dialog box appears, choose NO to leave the Setup Program
without saving your configurations to non-volatile RAM.
[FX 9-34]
Save Changes and Exit
Once you are finished making your selections, choose this option from the Exit menu to ensure
the values you selected are saved to Non-volatile RAM. The computer must save changes you
make to the Setup Program to Non-volatile RAM in order to make them operative. Non-volatile
RAM differs from standard RAM memory in that it is sustained by an on-board battery and stays
on even when the WinBook FX is turned off.
The next time you boot-up the WinBook FX, the BIOS loads the values saved in non-volatile
memory. If these values cause the system boot to fail, reboot and press <F2> to enter the Setup
Program. Once in Setup, you can try to change the values that cause the system boot to fail. If the
problem persists, load the default values as described below.
If you attempt to exit the Setup Program without saving your changes, the program will prompt
you with a message asking if you want to save your changes before exiting.
Summary of Contents for FX
Page 26: ...FX Chapter 3 ...
Page 123: ......
