The Setup Program menus allow you to change settings that enable or disable features on your
WinBook FX. Incorrect settings in these menus can cause the WinBook FX to operate in an
unusual way or fail to operate at all.
Default Setting:
The best way to determine if there is a problem with the WinBook FX is to use
default settings. This will cause the computer to operate as it did when you first received it.
NOTE:
Setting the Setup Program fields to their default configuration may cause external
accessories to stop working or to work incorrectly.
Getting Into the Setup Program:
Reboot the WinBook FX by pressing <Ctrl> + <Alt> +
<Del> all at the same time. When the Screen becomes active, press <F2> to enter the Setup
Program.[FX 10-22]
Leaving the Setup Program:
After making changes to items within the menus, press <Enter> to
select the new changes. To leave the Setup Program, press <ESC>. Use the arrow keys to move
into the
Exit
menu, then choose
Save Changes and Exit
. Your WinBook FX will leave the
menu and restart.
SCAN FOR VIRUSES
Viruses can cause damage to your system and data. You can obtain anti-virus software from your
local software dealer. For more detailed information, see "Viruses" in Chapter 8,
Security
.[FX
10-23]
BOOT PROCESS
BEEP AFTER STARTUP SCREEN STOPS
After I turn on my WinBook FX or after I reboot it, I hear a beep, then the screen stops
before it finishes booting.
The operating system needs correct information in the AUTOEXEC.BAT and CONFIG.SYS
files to boot properly.
Turn the computer off and then on.
Press the <F8> key to bypass these files at boot time.
If the system boots, use an editor or viewer to inspect the files.
Write AUTOEXEC and CONFIG settings down, and then reinstall backups of
these files and try again.
If you are using a port replicator, mini-dock, or docking station, undock the WinBook
FX and retry.
WINDOWS 95 WON’T LOAD
Summary of Contents for FX
Page 26: ...FX Chapter 3 ...
Page 123: ......
